When do I use the turn signals, both tail lights blink like hazard lights?

Q: When I use the turn signals, both tail lights blink like hazard lights. Hello! I need help with a tail light problem. This morning I got pulled over and given a warning about one of my brake lights not turning on when I use the brake, so I got home and fixed it doing some rewiring. It worked. Until I noticed the right side didn’t work.

Why do my tail lights blink when I Turn Off the car?

You have either a faulty battery (a load test on battery can easily determine status of battery), faulty charging system, and/or a substantial phantom load (parasitic power draw) that is discharging the battery while the vehicle is turned off…. You should have all the tires checked for a bent rim.

Why does my brake light and turn signal switch not work?

Without knowing exactly what wiring work was performed its nearly impossible to say definitively what the issue is. The brake light circuit and the turn signal circuit have crossed paths somewhere. The wires carrying the power supply from the turn signal switch is connected or touching the brake wires.

Why is my blinker not working on my Turn signal?

A direction signal system is designed to operate with a flasher or blinker unit which interrupts the signal which created the blinking action. Learn more – Locate turn signal flasher in Google Images. Step 4 – When a turn signal switch fails the system will short or go “open” causing the blinker not to operate.

Why are the brake lights not working on my Chevy S10?

Brake lights work when the lights are not engaged, Reverse turns on the brake lights, the emergency flashers cause the flashers to engage, as well making the license plate lights to flash. But here’s the really wierd thing, when I turn on the headlights, the lights on the rear just die.

Where are the tail lights on a Chevy S10?

CHEVY S-10 TAIL LIGHTS PROBLEM RESOLVED…It seems Chevy engineered a ground shorting clip located under the left rear bumper area. It looks like a connector for trailer wiring harness, but in actuallity is a metal shorting clip which ties 5 wires together.

What to do if your turn signal blinks?

If you’re unable to solve the issue yourself, have a certified technician, like one from YourMechanic, come to your location to diagnose the issue with your turn signals and help you make the right repair. The statements expressed above are only for informational purposes and should be independently verified.

Why do all trailer lights blink when one turn signal is activated?

The most likely cause for the incorrect behavior of your trailer lights, where activating one turn signal causes all trailer lights to blink, is an insufficient ground (or a short to ground) on either the vehicle or the trailer. Since you re-wired your trailer you can check for a secure ground connection at the trailer connector.

What to do if your turn signal blinks at the same time?

First, the easiest thing to check are the trailer connectors. You will be looking for any dirt or corrosion build up in one or both connectors (vehicle and trailer side). Clean them out if you find any dirt/corrosion and see if that helps.

When do the tail lights and brake lights come on?

The taillights come on when your headlights are on or your parking brake is engaged. The brake lights turn on when you apply pressure on the brakes. In most automobiles, the taillights are red while the brake lights are a brighter, more luminous red. The rear lights are controlled by the same switch as the headlights.

What should I do if my tail light is not working?

Preferred Procedure: Replace bulbs with manufacturer replacement bulbs. Tail light bulbs are replaced with incorrect bulb causing improper operation. If tail lights stay on continuously, the headlight/tail light switch or BCM has failed.

Why are my running lights blinking on and off?

The wire to the right side running light should carry a constant voltage since this is intended to be on at all times that the vehicle lights are on. If the output wire carries a correct continuous signal then there is a problem in your trailer wiring. Again we will test the brown right side running light wire going to the module input.

What are the running lights on a trailer?

The next thing is to make sure the wires on the trailer plug is wired properly to the trailer. If you have a 4-Way connector on the trailer the white wire is for ground, the green wire for right turn and brake, yellow wire for left turn and brake, and the brown wire is for running lights. I am including a link to a FAQ page on trailer wiring.

Why are right side brake lights and turn signal do not work?

Starting at the trailer side connector, follow the wires back to the tail lights looking for any sections that are pinched, frayed or damaged. It may be possible that there is a short on the right turn signal and brake light wire. Finding and fixing the short should solve your problem.

Why are my tail lights not working but brake lights are working?

Burnt out light bulbs – The other reason your tail lights are not working but your headlights are maybe a blown bulb. When the filament inside the bulb breaks it cannot illuminate the gas enclosed within the glass cover. This burnt-out bulb does not affect the circuitry of the light system and it continues to function normally.

How does the brake and tail lights work?

The brake and tail lights system in many cars is a simple wiring system. When the driver hits the brake, he slows down or stops the vehicle and, at the same time, activates a switch that lights up the brake light. And together with the brake light, the tail light is lit as well.

Why does the tail light stay on when the car is turned off?

There are many causes for tail light constantly staying on while the car is turned off: A broken brake light switch, damaged trailer light plug, faulty brake light switch stopper, broken wiring harness,… There are various reasons, however, you can check whether it is the brake lights or the tail lights to see which are the parts having problems.

Why are the brake lights not working but the tail lights are?

Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.

How can I tell if my brake lights are working?

You will first want to check the fuses on your tow vehicle. Some vehicles could have fuses for operating the turn signals and brake lights of a towing package. You will want to check if they are installed and working properly. The next thing is to make sure the wires on the trailer plug is wired properly to the trailer.

Where is the brake light switch on my car?

Fuse Box and Light Switch. You have to find the fuse box or the power distribution center (PDC). You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm.

When do you need to replace tail light bulbs?

You need to replace bulbs if they have got darkened or the filaments are blown. Choose the new bulbs of the same type and wattage. In most European cars, the same bulb does the job of the tail and brake lighting. However, it has double filaments, allowing one set still working while the other set is burnt.

How to smoke your lights, headlights, taillights, turn signals?

To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: Ew4i8Mwn7CVYACRc)

What to do if your turn signal is not working?

One interesting suggestion is to switch on the all-four lights flasher, as while parking. If all four lights flash then this would be a confirmed case of the turn signal switch malfunctioning. You can replace the switch to check if the signal is functioning. A thorough check can include the fuse as well.

Check the taillight bulbs. If the fuse and wiring look right, the bulbs themselves might be the problem. To check them, unscrew the taillight lenses from the outside using a screwdriver. If your lenses don’t have screws, open the trunk so you can access the lights from the inside.

Why are my brake lights not working but my tail lights are?

Damaged or disrupted wiring can cause tail lights not to work, but brake lights are. The two lightings use different wiring as each bulb has got its power supply. A recent accident at the tail end of your car can increase the likelihood of this problem.

To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: Ew4i8Mwn7CVYACRc)

When to take a tail light bulb to the mechanic?

If the bulb is fine, your car may have a deeper electrical problem. If the fuse, taillight wires, and bulb are all in good shape, it’s time to take the car to the mechanic. When you remove a bulb for replacement, you should inspect the socket for burnt contacts and the tail lamp for burnt contacts or melted socket boards.

Why are the brake lights not working on my Camaro?

The bright filament is used for the brake lights, while the dim filament is used for running/taillights. The brights can fail without the issue of the other dim filaments being affected. However, if both filaments are affected, then the turn signals will not work properly. Turn the hazards on.

Why are my brake and turn signal lights not working?

Having issues with your taillights, brake and turn signal lights or reverse lights? All issues are covered here: fuses, bulbs, bad grounds, broken, burnt or pitched wires and bad connections. Keep your patience, watch the video and we can find it and fix it. Loading…

Why are both brake lights blinking at the same time?

The hazard light button is essentially an additional power source and switch for the turn signal circuit. With both brake lights blinking, the hazard light circuit may be crosses in as well.

Where is the brake light on a 1960 GMC Truck?

How Its Wired 1960-61 These trucks should have a switch mounted near the bottom of the column with a cable up to the lever. The switch will have 6 post stacked like a pyramid. 1960-61 Switch/Plug Wiring Violet is the Right Rear Turn/Brake light. Dk Blue is the Right Front Turn. Yellow is the power from the flasher to the switch.

Why are the tail lights on my Chevy Silverado not working?

Tail lights not working on 1998 Chevy Silverado, bulbs ok check blinker relay it is ok. Fuses are OK. What could be the problem please … read more My 1999 Chevy Tahoe’s rear driving lights do not work nor do my dash lights behind the steering wheel. My husband has changed all the bulbs and also the fuse several times. How do we find the short?

Is there a turn signal for both left and right?

Although some models use a separate light for the left and right turn indicators, other models use a single light for both turns. If your instrument panel has only one indicator light for both left and right, check the flasher unit. Some vehicle models combine the brake light, taillight and turn signal into one light bulb.

Why is the right turn signal light not working?

Back probe the wire that supplies power to the right turn signal lights; the test light should not light. If the test light illuminates, replace the switch. Repeat the test, but this time operate the switch so the right turn signals light.

Why is my turn signal not flashing on my Fatboy?

Had the same problem on a 99 Fatboy changed the ignition switch and problem was solved Have a 97 FXDWG. Installed a badlander load equalizer 17 years ago for run and brake lights on the rear. If the bike is not moving the right turn signal functions correctly.

Why are my tail lights not working while driving?

Namely, if you leave your car lights on for a long period of time without driving, it will definitely burn your light bulbs. Also, the sun can cause damage to your light bulbs and make them malfunction sometimes. And, as we all know, it is not that simple to find out whether your tail light is burned or not.

Why are the head and tail lights not working?

The on-board computer turns on the tail and headlights according to the light outside the car. If it is dawn or dusk the head and tail lights will come on by themselves. The light sensors also switch off the daytime lights in some latest models. When the sensor is dirty or damaged it cannot tell if it is dark or day outside.

How are brake and turn signals combined on a trailer?

The brake and turn signals are combined on a trailer, so it would be odd if it was just the brake light giving you issues. Either way, I would check to make sure the ground on the light assembly itself is securely attached to a clean, bare metal surface – whether it ground through a dedicated wire or through its mounting hardware.

https://www.youtube.com/watch?v=za79nVpIcHg

What are the turn signals on a Harley Davidson?

ROGUE RIDER INDUSTRIES – Rear Motorcycle LED Turn Signals With Bright Red LED Tail Lights – BLACK LABEL SPECIAL EDITION – Motorcycle LED – Red LED Lights -1157 LED Turn Signal for SigZ Harley Davidson . . . . .

How to change the turn signal on a Dodge Ram?

Refer to the inside sticker of the fuse box panel and locate the two flasher relays. Switch the relays, and check if the turn signal lights are flashing. If one or both of the relays fails to turn on the turn signal light, replace as needed.

Where are the rear lights on a Dodge Ram?

For example, if you are having rear light problems, first check the wire harness supplying the signal and power to the rear lights, which is the harness located behind the wheel well on the driver’s side of the truck. If you look near the bottom of the wheel well, you will see a small panel; behind that panel is the wire harness.

Why does my turn signal light stay on?

Power Window Regulator An error occurred while retrieving sharing information. Please try again later.

Why are the lights on my truck not working?

These problems range from simple things like loose bulbs and corroded sockets to a more complex issue such as faulty wiring. It’s especially perplexing, for example, if the lights on the right side of the truck work but those on the left side don’t, or if one taillight works but the other doesn’t.

How to change the turn signal on a 2002 Dodge Dakota?

Free video instruction on how to replace a burn out front turn signal bulb on a 2002 Dodge Dakota SXT 2.5L 4 Cyl. Extended Cab Pickup. Rapid blinking indicates that a turn signal is burnt out on your 2002 Dodge Dakota SXT 2.5L 4 Cyl. Extended Cab Pickup About Us Maintenance Parts & Tools Contact English SpanishFrench Search Home

What does rapid blinking mean on a Dodge Dakota?

Rapid blinking indicates that a turn signal is burnt out on your 2002 Dodge Dakota SXT 2.5L 4 Cyl. Extended Cab Pickup About Us Maintenance Parts & Tools Contact English SpanishFrench Search Home Dodge Dakota 2003 Lights / Turn Signal – Front (replace bulb) Front Turn Signal Change Dodge Dakota (1997-2004) 1.

When does a Dodge Dakota Flasher go out?

If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn’t blink at all / stays stuck when engaged, this is your Dakota’s way of telling you that a turn signal bulb is burnt out.

Where are the turn signal relays on a Dodge Ram?

Check the flasher relay: On the driver’s side of the cabin, between the dashboard and the door, you will find a small panel covering the fuse/relay box. Refer to the inside sticker of the fuse box panel and locate the two flasher relays. Switch the relays, and check if the turn signal lights are flashing.

When does an indicator light turn on on a car?

Indicator light turns on whenever the engine is turned on to check the bulb. If the light stays illuminated, the car’s diagnostic systems have detected a malfunction that needs to be investigated.

What do the symbols on my car headlights mean?

These symbols are usually blue, green, or yellow in colour. Indicator light means that the vehicles dipped beam is on. Click Indicator light means that there is an exterior light on the vehicle that is not functioning properly. Click Indicator light means your car’s high beam headlights are on, or if the high beam flash function is used. Click

When does the handbrake indicator light turn on?

Indicator light turns on when the handbrake is on. If it lit continuously, it means that hydraulic pressure has been lost in one side of the brake system or that the fluid level in the master cylinder is dangerously low (due to a leak somewhere in the brake system).

What can you do with wireless tail lights?

The magnetic back plate attaches easily and firmly to your equipment and you can be on the road in minutes. The remote control provides wireless control over turn signals, brake lights, running lights, and emergency flashers. EZ On Taillights are a great solution for trailers, boats, towing, farms, ranches and agriculture.

Do you need a harness for EZ on tail lights?

EZ On Taillights are a great solution for trailers, boats, towing, farms, ranches and agriculture. They are a safe and a quick solution, using an LED fixture in an amber housing powered by batteries. You no longer need a wiring harness! The lights are bright and suitable for any condition. Don’t be caught with defective lights.

How long do magnetic tail lights last on batteries?

The lights can run for up to 40 hrs. on a set of batteries. No tools are required to install the magnetic lights. For applications where no metal surface is convenient to mount, a piece of metal or steel can be mounted to the vehicle to hold the lights. They have a galvanized steel back plate and three 40# magnets on each light.

How are the lights on a car controlled?

Each unit also has a safety strap to prevent loss or damage. The manual controls offer turn signals, running lights, brake lights and hazard lights all from a unit roughly the size of a garage door remote, which can be controlled from inside or outside the vehicle cab.

Power Window Regulator An error occurred while retrieving sharing information. Please try again later.

Where is the turn signal flasher on a Kenworth T370?

After taking apart almost all of the dash to find the flasher on this truck with little or no help from the local Kenworth dealer we finally located the flasher box inside the center of the dash. Here is a brief video that may help out. We could not find a video or picture. This may also be the location for Loading…

Do you need a flasher for an LED turn signal?

Yes, even if you go with LED bulbs in your turn signals you will still either need a replacement flasher relay or load resistors across each LED turn signal bulb.

Why are my turn signals blinking so fast?

No worries—it’s an easy fix! LED lighting draws much less power and lasts way longer than standard incandescent lighting that comes stock with most vehicles. Although the reduced draw of LEDs has advantages, replacement of turn signal bulbs with LEDS will cause what is called hyperflashing.

What happens when your tail lights are not working?

When the tail lights fail or do not function properly the car becomes a danger or hazard to self and others on the road. You may receive a ticket or citation from the traffic police. Blow fuse – The first thing the mechanics check is the fuse corresponding to the rear lights.

How can I tell if my tail lights have a fuse?

When you have located the fuse for the tail lights use a fuse tester to check the connection. If the tester lights up – your fuse is functioning fine. If it does not light up then, replace the fuse with another of the similar amperage and size. In many instances, you can see the break in the metal strip of the fuse.

Why is my dim turn signal not working?

Dim blinker, all lights working and no flickering. Apparently it does need a better ground, but why that one didn’t work for it is beyond me. I’ll just have to dive deeper into it when i have a decent place to work on it. Sounds like your on the right track.

Why is my turn signal dim at night?

The right one is almost not noticeable at night and hardly visible during the day. Now, whenever I turn on my headlights the two turn signal indicators in the dash light up…but the right arrow is always dimmer than the left. I can only assume that these two issues are related somehow. A ground maybe?

What are the lights on the left side of the trailer?

Brown goes in the left hole (the lights are marked). The brown wire is the running lights. The yellow wire is left turn and brake light. The passenger side light should have a green and brown wire connected. The brown wire is the running lights. The green wire is right turn and brake light.

Why do my trailer lights blink at the same time?

If you find that the signals are incorrect coming out of the converter then the converter has gone bad and it will need to be replaced. If the signals are correct coming out of the converter to the 4-Way then the issue is on the trailer side wiring. You will need to check the grounds at the trailer connector and the trailer lights.

What to do if your trailer turn signal is not correct?

If you still have the problem, disconnect the trailer to test the 4-Way on the vehicle using a circuit tester like # 40376. First, test the wiring going into the convert box on # 118426 from the vehicle tail light wiring. If the signals are not correct then you have a problem with the vehicle wiring.

Why are my brake lights and turn signals not working?

Running lines and trailer brakes work, but brake lights and turn signals do not. No blown fuses that state they have anything to do with the trailer Running lines and trailer brakes work, but brake lights and turn signals do not. No blown fuses that state they have anything to do with the trailer Skip navigation Sign in Search Loading… Close

Are there any turn signals that blink at the same time?

Tested the signals and all worked correctly at first, now both rt. and left signals blink at same time no matter which one I have on. Brake and running lights work properly.

Is there a universal tailgate light bar by CG?

Universal LED Tailgate Light Bar with Sequential Turn Signals by CG®. 1 Piece. Get this product to greatly improve your vehicle’s visibility and safety. Plus, this super stylish LED tailgate light bar will give your vehicle a more… Universal LED Tailgate Light Bar by IPCW®. 1 Piece.

How big is the Reese tailgate light bar?

The Reese Towpower multi-function tailgate light bar includes high-output LEDs that span the width of your vehicle. At 60-in long, you can illuminate the tail light,…

Why are the tail lights on my car not working?

If I hook up both wires to the tail lights I only have the brake light/flasher function, no tail lights. If I unhook the brake light/flasher wire the tail lights work. Do I need to install a resistor? Are the four incandescent maker lights causing the problem? Do I need to run a dedicated ground wire from the lights to the vehicle?

What should I do if my turn signal is not working?

A bolt or unpainted metal bracket will do. Then touch the socket contacts with your test light tip and have your assistant operate the turn lights. The test light should flash. If it does, check the ground connection at the socket.

How many LED bulbs do I need for tail lights?

Installed 1157 LED bulbs. If I hook up both wires to the tail lights I only have the brake light/flasher function, no tail lights. If I unhook the brake light/flasher wire the tail lights work.

Why are LED bulbs used for turn signals?

LED bulbs have little resistance on their own, so when used with turn signals they can create a hyper flash situation, which is a fast flashing of the bulb.

Can a car Flasher relay work with LED bulbs?

Generally, a stock automotive Turn Signal (or Hazard) Flasher Relay does not work with LED Bulbs unless it was designed for that. If you replace incandescent (regular) bulbs with LED Bulbs, you may notice one of two malfunctions: Either the lights will not flash at all, or they will flash fast/eratically, the latter is known as Hyperflashing.

What do you need to know about LED flashers?

What is an LED Flasher? An LED (-compatible) Flasher is a turn-signal or hazard flasher relay that works properly with LED turn-signal bulbs. Generally, a stock automotive Turn Signal (or Hazard) Flasher Relay does not work with LED Bulbs unless it was designed for that.

Do you have to ground a thermal Flasher?

This wire needs to be connected directly to ground. In the simplest case, that would be a piece of sheet-metal of the vehicle. The reason your flasher may have this is because none of the terminals of the flasher socket in the original vehicle design was grounded. Old style thermal flashers don’t need a ground, but LED compatible ones generally do.

Where are the brake and tail lights located?

These are separate lights and perform different functions. Knowing the differences between tail light vs brake light is important to understand their functions and roles in automobile safety. Both these lights are located on the rear side of a vehicle. To grasp their differences, it’s important to understand how they work.

Are there brake, turn signal, and brake lights?

Hotbodies Racing was one of the 1st to integrate brakes, running lights, and turn signals all in one LED unit. This one piece design is specifically… LED Tail Lights by Pathfinder LED®.

When do the tail lights come on in a car?

Tail lights come on in dim conditions. (Photo Source: wallpaperaccess) Front headlights trigger the tail lights. As you turn on the headlights only at night or in dark conditions, the red tail lights also remain inactive during the daytime.

When do the brake lights come on in a car?

The brake system triggers the brake lights. They come on whenever you apply the brakes. A pair of working brake lights are critical to driving and road safety. They give the drivers behind you a signal about the imminent speed change.

What kind of tail lights do I Need?

Epic Lighting OE Replacement Rear Brake Tail Lights Left & Right Sides Pair with Bulb Sockets & Connector Plates for 1988-2000 C10 K10 Blazer Yukon Tahoe Suburban Sierra GM2800104 GM2801104 5977867 5977868 . . . . . . . . . .

What are the features of custom LED tail lights?

Read more about the outstanding programmable features and operation of our exclusive Blaster-X motorcycle tail lights, which include advanced safety features such as our Brake Alert, Turn Alert and Strobe Mode! Custom LED is a pioneer in the art and science of LED tail light integration.

What are the features of Blaster X tail lights?

Take a look at all of our rave 5-star customer product reviews ! Read more about the outstanding programmable features and operation of our exclusive Blaster-X motorcycle tail lights, which include advanced safety features such as our Brake Alert, Turn Alert and Strobe Mode!

Which is the best bike turn signal light?

. Smart Bike Tail Light:Rechargeable Bike Tail Light,Smart Bicycle Turn Signal Lights, Bicycle Rear Light with Intelligent Brake Sensor,Portable Brake Light Warning Light Fits On Any Bikes. . . . .

How does a hyper flashing light bulb work?

It’s a deliberate function of the vehicle’s turn signal circuit that alerts the driver that there is a bulb failure. How does hyper-flashing work? Standard bulbs (not LEDs) use electrical resistance to create light . When you turn a bulb on, the filament will generate that resistance, in turn creating heat and light.

Where do the brake lights and turn signals go?

I could be wrong but I do believe the turn signals and brake lights all run through the multifunction lever. AKA the turn signal lever….. So you’re thinking that could be bad? I have had to replace them on chevrolets and one of our Macks. We couldn’t keep things simple we had to run brake lights and hazards through the turn signal lever.

Are there turn signals on my 97 F350 7.3?

Hey there, I’m having a very similar problem but i have tried the flasher relay fuses and the multi function switch and still no turn signals nor hazards. 97 F350 7.3, So I hook up my plow today and when checking the lights I realize I have no turn signals, rear brake lights and hazards. My 3 brake light does work above the bed.

Are there turn signals on a Ford F350?

Yes. Yes, but no turn signals or brake lights. No. Only the parking lights work on the entire rear of the vehicle. Does it have a reset relay/switch? I have lost lights before and if I turned the vehicle off and then restarted it my lights would activate. Since the high mount brake light does not work also we will need to check several things.

What are the symptoms of a bad turn signal Flasher?

1. Turn signals or hazards do not function. The most common symptom of a bad or failing turn signal / hazard flasher is hazards or turn signal lights that do not function. If the flasher breaks or has any internal issues it can cause the lights to malfunction, or not respond at all when the turn signal lever or hazard light button are pressed.

What are the features of a turn signal?

For the front and rear bicycle turn signals the type of features that your bicycle indicator kit comes with is very important. Some of the most basic features include the following; High-Brightness Led Light, Li Battery USB Charging, 3 Modes Laser Lights, Waterproof, Universal fitting, and a Wireless Remote.

Which is the best bicycle turn signal light?

The Bicycle Turn LED Signal Lights is the latest design in the market. It comes with superior features that have won the hearts of many users. If you choose to go with it, you will enjoy 64 inbuilt LED wireless turn lights, with a high laser power for all the weather conditions and road lighting.

When to replace your turn signal light bulb?

Your turn signal light bulb indicates your next move to other drivers on the road. A faulty bulb or flasher can result in one of your car’s indicators failing. When this happens, you may have to replace your turn signal bulb. At O’Reilly Auto Parts, we have turn signal bulbs and relays for select models.

What does a faulty turn signal light bulb mean?

When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures. Your turn signal light bulb indicates your next move to other drivers on the road. A faulty bulb or flasher can result in one of your car’s indicators failing.

Why do my turn signals stop flashing when I apply the brake?

Make sure you have the right bulbs in and check the wiring harness on your lights and take a look inside the light assembly for any short circuit. Also any addition like the third brake light and, like mayer said, a trailer light plug that is shortened can do it too. Good Luck to you Was this answer helpful?

When do your tail lights need to be on?

They are necessary when driving at night, twilight hours, or in bad weather like rain and snow. The purpose of your tail lights are to illuminate the rear of your car. Generally, they turn on when you flip the switch that also turns on your headlights.

Why are the tail lights on my GMC Sierra 1500 not working?

If you pull the headlight switch out and visually inspect the plug itself you will probably find that the withe wire and the brown wire are discolored. (Due to its intermittent connection they heats up) The female connector on both of those wires have lost one side of the clip that slides on to the headlight switch.

Why do the tail lights on my Chevy Cheyanne not work?

15 people found this helpful. 98 Chevy cheyanne, having the same issue as roger, my headlights, front marker, brake and turn signals work but rear tail lights do not work, I’ve trace no power up to the front connector under the brake boost.

Are there brake lights that work on a 1998 GMC Seirra?

39 people found this helpful. 1998 gmc seirra brake lights turn signals and reverse light all work. Marker lights do not work. Brake light only with with head ligh switch off. I’ve cleaned and replaced all grounds changed the whole rear harness replaced bulbs boards does anyone have any ideas?

Why is my GMC turn signal not working?

All turn signal operations flow through that switch and it seems GM may have under-engineered the electrical contacts in that switch. Some shops report that even after swapping out the switch, the problem remains and they must replace the entire turn signal mechanism (called the Multifunction Switch).

What kind of brake lights work on a 1998 GMC Seirra?

1998 gmc seirra brake lights turn signals and reverse light all work. Marker lights do not work. Brake light only with with head ligh switch off. I’ve cleaned and replaced all grounds changed the whole rear harness replaced bulbs boards does anyone have any ideas?

When do I use the turn signals, both tail lights blink like hazard lights?