What makes the Chevy 454 7.4L engine unique?

The return of the 231 V-6 to General Motors cars in the mid-1970s proved that fuel efficiency could be achieved in compact engines. But in 1988, Chevrolet introduced Throttle Body Fuel Injection to the 454. It was the same TBI system used on small-block V-8s and the V-6s. Fuel efficiency increased and the TBI system remained until 1995.

What to do when installing a 454ho engine?

Observe all safety precautions and warnings in the service manuals when installing a 454HO engine in any vehicle. Wear eye protection and appropriate protective clothing. Support the vehicle securely with jackstands when working under or around it. Use only the proper tools.

How big is a 454ho engine long block?

454HO Engine (12568774 Base) Long Block Specifications ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11 WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES. TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS. TITLE 454HO Engine (12568774 Base) Long Block SpecificationsIR 04AP14PART NO.19172102

How old is the ultrapower GM L29 454?

Its a brand new L29 454 from GM. Approx 32000km I installed 3 years ago. 196000km on rest of the truck. ( Joe Soares, 05/16/2021 ) We can accommodate your requests for the oxygen sensors, speedometer adjustment and increased HP/TQ.

Where can I buy a Chevy 7.4L 454 engine?

Complete Engines for Chevy 7.4L/454 Engine for sale | eBay Get the best deals on Complete Engines for Chevy 7.4L/454 Engine when you shop the largest online selection at eBay.com. Free shipping on many items | Browse your favorite brands | affordable prices. Skip to main content Shop by category Shop by category Enter your search keyword

Which is 454 engines were in Chevy one-tons?

The 1973 1-ton trucks were equipped with a 240-horsepower 454 generating 355 foot-pounds of torque. In 1977, General Motors offered special trailering packages for its Chevys and GMC trucks, including the 1-tons. These 454s with four-barrel carburetors developed 230 horsepower and 360 foot-pounds of torque.

What kind of manual transmission does a Muncie 454 have?

The Muncie four-speed manual with overdrive was available on 1982 to 1987 models. The 1973 to 1976 half- and three-quarter-ton trucks with the 454 received the TH350 three-speed automatic.

Is the Chevy 454 LE8 still in use?

The LE8 version still served GM trucks through 1991, although its horsepower rating varied from a low rating of 215 horsepower in 1974 up to about 230 in 1991. The standard transmission matching the LE8 454 on 1973 to 1987 trucks was the four-speed Muncie manual.

What kind of truck has a 7400 engine?

The 7400 reigned for five years and equipped 26-foot U-Haul trucks in commercial applications and was the primary powertrain for GM line of trucks. It appeared in the Chevy Silverado, GMC Sierra, Chevrolet Suburban and the Chevrolet Express.

What kind of engine is a 7.4 liter?

7.4 Vortec Engine Specs. The 7.4-liter engine is known as the General Motors 7400, which was a Vortec-designated engine built from 1996 until 2001 as a truck engine. Vortec technology was first introduced by GM in 1986 in a V-6, 4.3-liter engine called the 4300. The word “vortec” comes from the word vortex.

How many horsepower does a GM 7.4 Vortec engine have?

Applications. The 7.4-liter, 7400 454-cubic inch engine provided the same 290 horsepower across the board for all GM products. Then in 2001, GM discontinued the 7400 and the 454 configuration in favor of the last big block produced, the 8100 496-cubic inch engine rated at 340 horsepower at 4,200 rpm with 455 foot-pounds of torque at 3,200 rpm.

What kind of engine does a Chevy 7.4L have?

Its bore and stroke was 4.25 inches by 4 inches. With a Rochester 750-cfm four-barrel carburetor, it generated 390 horsepower at 4,800 rpm. Its torque rating was 500 foot-pounds at 3,400 rpm. Its compression ratio was 10.25:1.

When did the 7.4L V8 come out?

What kind of engine does a Chevelle have?

It powered the Camaro, Chevelle, El Camino and Corvette. There were multiple versions that included the LS7 aftermarket crate engine that wielded 500 horsepower. The first version, the LS5, featured a four-barrel carburetor and developed 360 horsepower for the Chevelle and 390 horsepower for the Corvette.

When did Chevy stop making the 454 engine?

However, tighter government emission standards and safety concerns prompted Chevy to detune the LS 454, which was the most common 454, in 1972 to 270 horsepower. Even by 1980s standards, the 454 was a relic of the past. It was huge and wasteful.

What kind of car is the Chevy 454 Vortec?

by Richard Rowe. Also known as the Vortec 7400 (7.4L, Regular Production Option designation L29), Chevrolet’s Vortec 454 was a modern-day evolution of the company’s most legendary big block.

What is windage tray on Chevy 454 Vortec?

Install an aftermarket windage tray in your engine. Windage trays are thin, sheet metal plates that bolt to the bottom of the main caps and act as a barrier between the oil in the pan and the crankshaft counterweights.

How big is the engine in a GMC Suburban?

The 7400 refers to the engine size in cubic centimeters and this easily translates into 7.4 liters. This engine series ran from 1996 to 2001 in Chevy and GMC heavy duty line of trucks like the Chevy and GMC Suburban. The 7400 series was retired in 2001. The 7400 Vortec V-8 GM engine has 454-cubic inches and was rated at 290 horsepower at 4,000 rpm.

by Richard Rowe. Also known as the Vortec 7400 (7.4L, Regular Production Option designation L29), Chevrolet’s Vortec 454 was a modern-day evolution of the company’s most legendary big block.

The Chevrolet 454 was eliminated from most passenger cars by 1975 but remained a viable powerplant in heavy-duty Chevrolet trucks through 1996. The Chevrolet 454 remains a favorite among performance enthusiasts because of the its power output and the availability of aftermarket parts for the engine.

Choose a type: If you prefer OEM 454 engines you can choose from those made by the original equipment manufacturer. You can also choose from performance and custom GM 454 engines designed to be compatible with your Chevrolet vehicle. Select the number of cylinders: The 7.4L 454 is an 8-cylinder engine.

How tall is a Chevy 454 crate engine?

Engine Assembly, Crate Engine, Chevy, 454 HO, 438 hp, Cast Iron Rectangle Port Heads, Each Crate Engine, Long Block, Chevy 454 Stroker, SBC Crate Motor, New Block and Cylinder Heads, Roller Cam, 563HP Crate Engine, Dressed Longblock, Big Block Chevy, 540ci Stroker, BBC Crate Motor, Standard Deck Height, 670HP

What kind of fuel delivery system does a 454 engine use?

This is an aspirated fuel delivery system with the addition of a mixture control system controlled by the ECM. It is not even close to the ECM used today. This fuel delivery system uses a mechanical fuel pump with the addition of an inline lift pump between this pump and gas tank on some systems to help prevent vapor-lock.

Where are the fuel injectors located in a 454 engine?

The throttle portion of both the TBI units may contain ports located above, or below the throttle valve. These ports generate the vacuum signals for the exhaust gas recirculation (EGR) valve, MAP sensor and the canister purger purge system. The fuel injectors are solenoid-operated device, controlled by the ECM.

Where is the fuel pump located in a 454 engine?

Evaporation emission control system. The injector fuel control systems have a electric fuel pump, located in the fuel tank on the gauge sending unit. It pumps fuel to the throttle body and the direct fuel injector system through the fuel supply line and then through an in-line fuel filter.

When did the V-8 454 come out?

The 454 emerged in the 1990s carrying the same characteristics of the small-block V-8s. It received a single-piece rear main seal, four-bolt main caps, aluminum valve covers and a non-adjustable valvetrain.

What’s the idle RPM on a 99 Vortec?

Truck recently had an exhaust manifold replaced. When its cold (as in first thing in the morning), it fires right up and high-idles for a few seconds and runs fine. After the first few seconds, its idles rough. The engine struggles to keep it above 7-800 RPM.

What kind of engine is a Chevy 454?

Engine Assembly, Crate Engine, Chevy 427, 480 hp, 490 lbs./ft Torque, ZZ427/480 , Each Crate Engine, Dressed Long Block, Chevy 454 Stroker, SBC, New Block and Cylinder Heads, Roller Cam, 563 HP Crate Engine, Long Block, 496 Stroker Power Adder Ready, Chevrolet 454 Style, Roller Cam, Aluminum Heads, Each

Where is the idle button on a GM TBI?

The “A” and “B” terminals are located on the top right of the connector. Unplug the IAC valve located on the passenger side, rear of the throttle body. Start the engine. Insert a T-30 size Torx driver into the Idle adjustment screw that is located behind the plug removed earlier.

Why is my 7.4 Vortec rough idle leaking fuel?

Get a scanner on it and check the LTFT’s. If they’re pegged at +25 then the FP regulator is leaking. Very very common issue on the 7.4’s. If you don’t have scanner access connect a FP gauge, cycle the fuel pump a couple times and then watch the gauge for drop off.

What kind of engine was in a 1998 Chevy truck?

By 1998 the Vortec V8 engine was being used in Chevrolet’s line of big horsepower machines. The engine produced 255 to 290 horsepower. Cylinder heads became high flow, a new camshaft, roller valve lifters and a higher compression ratio increased fuel economy.

When did the Chevy 7.4L V8 come out?

The 7.4L (454 cubic-inch) V8 was a big-block engine manufactured by the Chevrolet Division of General Motors starting in 1970. It was the second-largest Chevy production engine after the 8.2L, or 502 cubic-inch motor. Starting in 1970, near the end of the muscle-car era, Chevy used the 454 in high-performance cars such as the Camaro.

When did the Chevy 454 V8 come out?

Starting in 1970, near the end of the muscle-car era, Chevy used the 454 in high-performance cars such as the Camaro. It powered Corvettes from 1970 until 1974 and Chevelles until 1975. From 1996 until 2001, GM built a truck version of the 454 called the Vortec 7400. Three variants of the 7.4L Chevy 454 were produced besides the truck version.

What kind of fuel pump does a TBI 454 have?

Stock TBI 454 makes 230hp and 380tq so stock fuel pump is maxed out right off and a typical 454 will run better with a fuel pump upgrade even with stock chip. GAS MILEAGE. Always a big complaint with 454 TBI trucks. 90 and older is particularly bad and that is largely due to NO OVERDRIVE.

Can you change the intake manifold on a TBI?

Intake manifold. On the 87-90 Mark IV blocks that have the crappy iron carb intake. yes change that to the Edelbrock 3764 especially if your upgrading that cam. On the Mark V 91-95 engines. With stock cam, nothing to be gained from that change.

What kind of fuel system did the 1980 Chevy 454 use?

A M4MC or EM4MC carburetor was used on most of the 1980 series engines. This is an aspirated fuel delivery system with the addition of a mixture control system controlled by the ECM.

How does the fuel pump work in a 454 engine?

It pumps fuel to the throttle body and the direct fuel injector system through the fuel supply line and then through an in-line fuel filter. The pump is designed to provide pressurized fuel at 125 kPa (18psi.) A pressure regulator in the TBI keeps fuel available to the injectors at a constant pressure between 62 and 90 kpa. (9 to 13psi.)

What kind of engine is a 1988 Chevy 454?

Specifications for the 1988 454 RV Engine by Jeff Slater Manufactured by Chevrolet, the 454-cubic-inch big-block V-8 is a workhorse used in a multitude of applications. The reliability and high torque made it an ideal choice for everything from light duty trucks, to SUVs and motorhomes.

What kind of gas does a Chevy 454 run on?

It is fuel injected and runs on regular unleaded gas. A popular choice for recreation vehicles, the Chevy 454 found its home in motor-homes, although it was never originally designed for that purpose. The volume of engines produced, vast parts availability and relatively cheap cost made the transplant extremely attractive.

How many horsepower does a Chevy 454 crate engine have?

Crate Engine, Marine, Long Block, Assembled, External Balance, Cast Iron Heads, Chevy, 454, Each Crate Engine, Marine, Long Block, Assembled, External Balance, Reverse Rotation, Chevy, 454, Each Crate Engines, Marine Pro Series GM 540 C.I.D. 670 HP Dressed Long Block, Assembled, Internal Balance, Aluminum Heads, Chevrolet, Big Block, Each

Why did my GM 454 Backfire at WOT?

I replaced the in tank fuel pump last month thinking it was fuel starvation while going up hills at WOT (wide open throttle). The fuel pressure with the old pump was low showing around 8 psi on the pressure gage that I permanently mounted 3 inches from the throttle body on the pressure line.

When did the GM 454 TBI 220 come out?

I’m having problems with my engine which is a gen 5 454 tbi 220 model made in 1992. It has the OBD1 system which was the predecessor to the OBD2 system that all cars 1998 I think and newer have now. With the OBD1 system you don’t need a code reader to get your codes.

What is the TBI code on a 1990 Chevy truck?

Consult a service manual or see below for any check engine light code definitions. You can use a late 80’s or early 90’s GM TBI definition. If you have access to a scan tool use a hook up for a 1990 350 cu. in. 5.7L Chevrolet truck. For some scan tools enter VIN 10th“L” 3rd“C” 8th“K”.

How to troubleshoot your TBI fuel injection system?

Troubleshooting your TBI Fuel Injection System Most of the problems encountered while installing your fuel injection system or after a time of operation are very simple. If your check engine light is on you more than likely have a hard fault meaning something is grounded out, unplugged, operating out of range or has gone bad. See

Why does the test light go out when cranking the engine?

With the voltmeter or test light still connected crank the engine and verify voltage to the pink wire on the injector connector. Results: “0” volts or the light goes out when cranking the engine. The primary (pink) ignition wire is incorrectly connected to the vehicle.

Where does the vacuum leak come from on a TBI?

There are instances where the vacuum leak is coming from the adapter plate used to attach the throttle body to the manifold. If this is the case make sure that the seal is positive between the manifold and the adapter plate; also between the adapter plate and the throttle body.

Is there a Vortec 454 fuel pressure regulator?

The vortec 454 does not have the same injectors as the small block vortec. It uses the same type injector LT1 and TPI engines. They are buried under the plenum. Do you have any signs of fuel in vacuum line to the regulator? Does the fuel pressure at idle seem steady?

Is the Vortec 454 in a 97 Silverado 3500?

I have a 97 silverado 3500 with the vortec 454 in it. It has 200k on it, and has a horrible low throttle input miss and a high idle at times. It is also way down on power and stumbles until you really give it some gas, but even then, you can tell its low on power.

How can I Check my fuel pressure regulator?

(1) Check your compression, the fastest way to see if they are all at least even with each other is to disable the ignition and roll it over with the starter. If it sounds like a nice even rhythm its probably ok.

What kind of pressure regulator does a Camaro have?

2005 CBR 1000RR…”mostly stock”. 1968 camaro… “in the works”. OK lets start with the basics. (1) Check your compression, the fastest way to see if they are all at least even with each other is to disable the ignition and roll it over with the starter.

What makes the Chevy 454 7.4L engine unique?