Is there a 4WD light on a 2000 Chevy Silverado?

Mine is a 2000 Silverado Z-71 Extended Cab. The part number is the longer of the two – 15709327. I believe they used this part for 1999, 2000, and 2001. You can purchase the part, APDTY 012173 4×4, Four Wheel Drive 4WD Transfer Case Selector Button Switch. Replaces GM Part Numbers 15709327, or 19168767, from amazon by clicking the link below.

How much does it cost to fix 4WD light on Chevy Silverado?

The light is scary and led me to believe there were major issues with my four wheel drive, but it turns out its a quick, cheap, and painless fix by swapping out the 4wd selector switch. If you take it to a dealer they will charge you from as low as $180 to as high as $400.

What is the 4 wheel drive switch on a 2000 Chevy Silverado?

Turn the switch over and look for the part number on the back. Mine is a 2000 Silverado Z-71 Extended Cab. The part number is the longer of the two – 15709327. I believe they used this part for 1999, 2000, and 2001. You can purchase the part, APDTY 012173 4×4, Four Wheel Drive 4WD Transfer Case Selector Button Switch.

How to reset the service 4WD light and the ” change ” light?

To reset the Change Oil light turn the ignition on but do not start and then push the gas pedal 3 times. The Service 4WD light is most likely the 4WD switch on the dashboard. If the lights are acting funny then the switch needs to be replaced.

What does the service 4WD light on a GM Truck mean?

The solid lights on the 4WD buttons are telling you where the transfer case encoder motor thinks it is, and blinks on the mode that it is trying to go to after you push the button. If it fails to move to the new position, it goes back to a solid light on the original position and illuminates the “SERVICE 4WD” light.

Why is my 4WD light not working on my Chevy Silverado?

4wd will not switch. 4wd service light on. electronic pushbutton panel for 4WD intermittently stops working and cannot get vehicle into 2WD or 4WD; lights go completely out the four wheel drive indicator switch switches almost everytime I start the truck. when I try to switch it using the buttons nothing happens.

When does the 4 wheel drive light come on?

Won’t light up 4×4 selecter. 4wd service light comes on, and goes off after turning of engine and restarting. I bought a 2006 Silverado that has a service 4 wheel drive light that comes on when driving for a short time. I notice that a visitor posted that he bought the switch to resolve the problem for 35.00 online and replaced it himself.

How to diagnosis and repair a GM 4WD truck?

Check every function for response: 2HI, Auto4WD, 4HI, 4LO, Neutral. Pull the dashboard apart (it is just held with clips) and pull out the buttons. Disconnect both connectors. Using the DMM, measure the resistance between the innermost pins on both connectors. The resistance should be steady (no changes while the button is pressed).

What does a dashboard warning light on a Chevy truck mean?

Whether you drive a Chevrolet car or truck, you may have a dashboard warning light appear. If so, select your model of Chevrolet to find out what those dash lights mean, with each symbol explained. It’s not always clear what a dashboard warning light means.

What is the part number on a 2000 Chevy Silverado?

Mine is a 2000 Silverado Z-71 Extended Cab. The part number is the longer of the two – 15709327. I believe they used this part for 1999, 2000, and 2001.

Why is my back up light not working on my Chevy Silverado?

See all problems of the 2015 Chevrolet Silverado . Left brake light continues to stop working. Bulb is good, still won’t work. Drivers side back up light is the same way.

Why are there no lights on my 4WD?

2006 silverado 1500. 4×4 would not engage on mine. I would receive service 4wd message on dash and 4wd switch would change light locations randomly. Changed swich and it did not fix the problem.

Why are my back up lights not working?

In addition, use of backup lights in this manner can teach children to disregard backup lights as a potential movement indicator, and increases their chances of runover by walking behind a vehicle that is truly in reverse and about to move.

See all problems of the 2015 Chevrolet Silverado . Left brake light continues to stop working. Bulb is good, still won’t work. Drivers side back up light is the same way.

Where are the brake lights on a Chevy Silverado?

Check the Brake Lights Circuit. Start at the fuse box under the hood and make sure the brake lights fuse is not blown, that the terminals are free of corrosion and that the connections are tight. Then check the brake light switch on the bake pedal arm. Back probe the switch terminals with a test light.

What to do if your parking lights are not working?

Replace the fuse, if it is blown, and then close the fuse panel before lowering the hood of your truck. Check your parking lights by starting the ignition and running your parking lights. Figure 2. A good fuse will not have any breaks along the metal strip.

What does it mean when the service engine soon light illuminates?

What Does It Mean When the Service Engine Soon Light Illuminates on a 2000 Chevy Silverado? The service engine soon light, commonly referred to as the check engine light, on a 2000 Chevy Silverado, or any vehicle, can have a number of meanings depending on the issue.

Why does the Check Engine light come on on a Chevy Silverado?

Oxygen sensors can change the way that your Silverado’s engine runs. Most of the time, the check engine light will come on. It’s a good thing that the check engine light would come on, as there is more than one oxygen sensor, and they can be difficult to get to and test.

What happens when the oxygen sensor goes bad on a Chevy Silverado?

Your Silverado can exhibit symptoms when the Oxygen sensor has gone bad. Or, it may exhibit none at all. Often enough, the only sign of the problem at all is the service engine soon light being on. The good news is, if you end up discovering that the oxygen sensor is bad, they really aren’t that expensive to replace.

Can a Chevy Silverado have a slipping 4WD system?

So if your Chevy Silverado is showing symptoms of a slipping 4WD system, continue reading for common diagnoses and repairs. This article applies to the Chevrolet Silverado GMT800 (1999-2006). 4WD systems give truck owners unprecedented abilities when it comes to gaining traction, both on and off the road.

Why does the servce 4WD light not come on?

The 4Hi and 4Lo lights just flash but 4WD does not engage. Also the ‘SERVCE 4WD’ light does NOT come on ruling out transfer cases problems. Get under the front of the truck and check the actuator. It is a silver cylinder on top of the axle as I said before.

Where is the 4WD control module located on a Chevy Silverado?

The 4WD control module is located deep within your dashboard, and is very difficult as well as expensive to replace. On occasion, they start to go bad, generally causing 4WD to not engage and without any codes being thrown. But if you are getting a code, the problem is still likely not your module.

What to do if your Chevy Silverado Wont Stop?

If your Silverado is having trouble stopping, or noticeably leaking fluid, don’t drive it. Just have it towed to a mechanic. If you mess up fixing your engine, the vehicle does not move. If you mess up fixing the brakes, it doesn’t stop.

Mine is a 2000 Silverado Z-71 Extended Cab. The part number is the longer of the two – 15709327. I believe they used this part for 1999, 2000, and 2001.

What is the maintenance schedule for a Chevy Silverado 1500?

The Chevrolet Silverado 1500 maintenance schedule includes 34 different types of services over the course of 150,000 miles. RepairPal generates both national and local fair price estimates for most service intervals.

How do you remove a 4 wheel drive light?

There are about a dozen points where it connects. Pop them off and pull the dash plate off. To remove the four wheel drive select switch there are little plastic locks on the top and on the right, hold them up and pull out. Turn the switch over and look for the part number on the back.

What is the actuator on a 4 wheel drive?

The actuator is a component found mostly on modern four wheel drives and is designed to electronically engage 4 wheel drive. It accomplishes this by means of a small electric motor bolted onto the transfer case that shifts a pin in place to lock the center transfer differential.

What does the blinking 4 wheel drive indicator mean?

So what is that 4 wheel drive indicator blinking on your dashboard means? The purpose of the 4 wheel drive light is to indicate when you have engaged 4WD mode by selecting 4H. When the light flashes continuously for more than 30 seconds it signifies there is a problem somewhere on your drivetrain system and that 4WD has not engaged properly.

Why does my GMC Sierra 1500 say service 4WD?

Having similar issues as above, had to drive the truck in 4wd high for a short period of time without the rear drive shaft, heard a clunk and the service 4wd message came on, the front drive shaft quit which left me stranded.

What does the four wheel drive warning light mean?

The four wheel drive light means your car has activated four wheel drive. If the Service 4WD light is on, there may be an issue with the system. Is it safe to drive with the four wheel drive indicator lights on? Anyone who off-roads for a hobby knows that four wheel drive is a must have.

Why is my Silverado 4 wheel drive not working?

This morning I tried to switch to 4wd drive and realized it wasn’t engaging. The “service 4 wheel drive” message popped up and the knob to change from 2wd – 4wd light was stuck on 4wheel drive (i turn it to 2wd drive and it showed that it was in 4wd) but 4wd wasn’t working.

Is there a 4WD light on a 2000 Chevy Silverado?