What causes a Chevy Colorado to have p0014?

Here are the most common causes of P0014 in the Chevy Colorado: Wiring Issues – If the wiring to the camshaft actuator has gone bad it can cause P0014. It’s good place to start diagnosing P0014. Is the harness connector plugged in?

What is the trouble code for Chevy Colorado?

P0014 is a relatively common trouble code for vehicles that have Variable Valve Timing (VVT). This includes the Chevy Colorado. VVT adjusts the camshafts position at different RPM’s and engine loads to maximize the operating efficiency of the motor.

What to do if your check engine light says p0014?

Check to see if there are any other codes along with P0014 and clear your Check Engine Light with FIXD. Check the engine oil level and condition. If it’s low, adjust to spec and test drive to see if the concern is resolved. If it’s dirty, change the oil and filter and test drive to see if the concern is resolved.

What does it mean when code p0014 is set?

The camshaft (s) is (are) adjusted by the ECM through the use of an oil control valve (s) (OCV) also called variable valve timing control solenoid valves. When trouble code P0014 is set, it means that the exhaust camshaft in Bank 1 is more advanced than the ECM has told it to be. What Are The Symptoms Of Code P0014? What Is The Cause Of Code P0014?

What are the symptoms of Chevy Colorado p0014?

Typically, P0014 will cause quite a few noticeable symptoms in the Chevy Colorado. They include (but are not limited to): Difficulty Starting – Like any vehicle with ignition timing that is too far advanced, it can be really difficult to start a vehicle with P0014, particularly when the engine is at normal operating temperature.

How much does it cost to repair a p0014 Chevy?

The cost to diagnose the P0014 CHEVROLET code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

What causes the p0014 OBD-II trouble code?

P0014 is the OBD-II generic code that the engine control module (ECM) has determined that the bank 1 exhaust camshaft is more advanced than what the ECM has commanded it be. This over-advanced condition could be during advancing or retarding of the camshaft timing. What causes the P0014 code?

What does p0014 mean on a camshaft?

Cost of diagnosing the P0014 code. P0014 is a diagnostic trouble code (DTC) for “Camshaft Position B – Timing Over-Advanced or System Performance (Bank 1)”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.

What causes a Chevy Colorado to have p0014?