Where is the water pump on a 2008 Impala?
Where is the water pump on a 2008 Impala?
The water pump is mounted on the right side of the engine and is driven by the accessory drive belt. When you replace the water pump, you will reuse its pulley on the new water pump. The 2008 Impala requires the use of DEXCOOL coolant, which cannot be mixed with any other type of coolant.
What kind of coolant do you use on a 2008 Chevy Impala?
When you replace the water pump, you will reuse its pulley on the new water pump. The 2008 Impala requires the use of DEXCOOL coolant, which cannot be mixed with any other type of coolant. Park the vehicle on a level surface and set the parking brake. Lift the vehicle hood and support it with the hood prop rod.
How do you remove a water pump from a car?
Remove the water pump pulley bolts, and remove the pulley from the water pump. Remove the bolts securing the water pump to the timing cover. Remove the water pump and water pump gasket from the timing cover. Clean the mating surface on the engine block with the wire brush.
What kind of engine does a Chevy Impala have?
The 2008 Chevrolet Impala base model came with a 3.5-liter engine and an automatic transmission. The water pump is mounted on the right side of the engine and is driven by the accessory drive belt.
Where can I get a water pump for my Chevy Impala?
At AutoZone, you can find a quality water pump replacement for Chevrolet Impala that’s also within your budget. Impala water pumps keep your engine cool by pumping water and coolant throughout the cooling system.
How to tell if a car’s water pump needs replacement?
How to Tell if a Car’s Water Pump Needs Replacement. Your car’s water pump is an important part of your vehicle. It is the part that continually pumps coolant to your vehicle’s engine so that it doesn’t overheat.
How often should you change your water pump?
Some water pumps have plastic impellers that move the coolant and some coolant is corrosive once the additives wear away (you’re supposed to change your coolant every three to seven years to prevent engine damage when these additives wear away). The water pump impeller can wear out, thus no longer moving coolant around, so your car overheats.
Where is the water pump located on an Audi A3?
The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. .
