How do I change my Compustar run time?

Adjust the time settings by tapping the Lock button to change the hour and Unlock button to adjust the minute. STEP 3: Once the time has been set, exit remote programming by holding down the Trunk and Start/Stop buttons for 2.5 seconds.

How do I reset my Compustar command?

You must cycle the vehicle’s ignition between the on and acc/off position 5 times within 7 seconds or less and then tap the lock button, button I, or put the battery in the remote (2WSSR / P2WSSR). The process depends on which remote(s) you have. All your remotes must be reprogrammed at the same time.

Where can I find the Compustar starter manual?

This manual is for authorized CompuStar dealers. Please thoroughly review this manual before beginning installation. If you have any questions please contact your distributor or tech support 888-820-3690. (8:00 am to 5:00 pm Pacific Coast Time) This is a simplified manual The Master Installation Manual is available on www.compustar.com. 1 Red

What is the installation manual for the cm4200?

Version Final – VF CM4200 and CM1000S Starter Control Module Installation Manual This manual is for authorized CompuStar dealers. Please thoroughly review this manual before beginning installation. If you have any questions please contact your distributor or tech support 888-820-3690. (8:00 am to 5:00 pm Pacific Coast Time)

How do you program a Compustar TV remote?

The remotes do not come preprogrammed as a result of the modular design of the CompuStar lineup. Program Tach: Program tach by tapping the tach learn button located on the back of the control module. Set Options: Using the Option Programming section of this manual, set the options of the control module. Test:

How do I change my Compustar run time?