How much does it cost to diagnose a camshaft position sensor code?
How much does it cost to diagnose a camshaft position sensor code?
Sometimes and in some models, low battery voltage or a weak starter can trigger a Camshaft Position Sensor code. What does this mean? The cost of diagnosing the P0343 code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
When did the Chevy camshaft timing sensor change?
These parts do not interchange and must be replaced with the same year parts or the engine will not work properly. The 2001 camshaft gear / sprocket and camshaft timing position sensor were revised in 2002 and again in 2004 to maximize the benefits of Magnetic Reluctance (MR) or “mirror image” ignition timing.
Do you need tall sensor for 2001 Chevy?
In the case of the latest model (2004+) timing sets, you will also need to purchase the new “tall sensor” timing cover and conversion harness. The stock computer will run all three units without modification or tuning required. 2001 engines use a discontinued camshaft gear and sensor.
What is the OBD2 code for a Chevy?
OBDII Chevrolet Code Definitions. Be sure to double check the codes. Anything P1000 to P1999 or P3000 to P3400 will be Manufacturer specific and may not match the ones listed here. Check specific manufacturer pages on the site, as some of them, we list the OBD2 codes on those pages for those specific vehicles.
How to check the camshaft position of a car?
Start with a visual inspection of the connector, wiring, and valve. Repair or replace any damaged components such as the valve control solenoid being stuck open. Check the condition of the engine oil. If it is too low or overly viscous, change your oil. Scan your codes again and capture the freeze frame data.
What are the symptoms of a bad camshaft position sensor?
Symptoms of a Bad or Failing Camshaft Position Sensor. $79.99 – $89.99. Average rating from 4,829 customers who received a Check Engine Light is on Inspection. The camshaft position sensor gathers information about the vehicle’s camshaft speed and sends it to the vehicle’s engine control module (ECM).
What does p0011 mean on a camshaft?
Bank one is the bank of cylinders that contains cylinder one. This code indicated that the camshaft timing is above the threshold, also called being over-advanced. What Are the Symptoms of Code P0011? Like other timing issues, an over-advanced camshaft can cause the engine to run rough.
These parts do not interchange and must be replaced with the same year parts or the engine will not work properly. The 2001 camshaft gear / sprocket and camshaft timing position sensor were revised in 2002 and again in 2004 to maximize the benefits of Magnetic Reluctance (MR) or “mirror image” ignition timing.
