What does code P0785 mean?
What does code P0785 mean?
The code P0785 Shift Timing Solenoid A Malfunction is set there is a general malfunction present within the solenoid or its circuit. Note: If you have a GM vehicle (GMC/Chevrolet/etc.) with the 4L60-E transmission, the code description for this is actually Transmission 3-2 Shift Solenoid.
What causes the shift / timing solenoid code p0785?
If the data from the shift/timing solenoid does not match the manufacturer’s specifications for the particular situation or command, the TCM will assume that there is a malfunction, and alert the PCM to store the P0785 code. What causes the P0785 code? The most likely causes of the P0785 code include:
What does DTC p0785 stand for in Chevrolet?
When the Powertrain Control Module (PCM) detects a continuous open, short to ground or short to power in the 3-2 SS valve assembly circuit, then DTC P0785 sets. The 3-2 Shift Solenoid (SS) valve assembly is a normally-closed, 3-port, on/off device that controls the 3-2 downshift.
What does it mean when your PCM says p0785?
All our repairs are backed by our 12-month / 12,000-mile warranty. The appearance of the P0785 code means that the PCM detected an abnormal malfunction in the shift/time solenoid.
Where is the solenoid located on a 3-2 shift valve?
The 3-2 Shift Solenoid (SS) valve assembly is a normally-closed, 3-port, on/off device that controls the 3-2 downshift. The solenoid attaches to the control valve body within the transmission. The solenoid receives ignition voltage through circuit 239. The Powertrain Control Module ( PCM) controls the solenoid by providing a ground path.
If the data from the shift/timing solenoid does not match the manufacturer’s specifications for the particular situation or command, the TCM will assume that there is a malfunction, and alert the PCM to store the P0785 code. What causes the P0785 code? The most likely causes of the P0785 code include:
When the Powertrain Control Module (PCM) detects a continuous open, short to ground or short to power in the 3-2 SS valve assembly circuit, then DTC P0785 sets. The 3-2 Shift Solenoid (SS) valve assembly is a normally-closed, 3-port, on/off device that controls the 3-2 downshift.
All our repairs are backed by our 12-month / 12,000-mile warranty. The appearance of the P0785 code means that the PCM detected an abnormal malfunction in the shift/time solenoid.
The 3-2 Shift Solenoid (SS) valve assembly is a normally-closed, 3-port, on/off device that controls the 3-2 downshift. The solenoid attaches to the control valve body within the transmission. The solenoid receives ignition voltage through circuit 239. The Powertrain Control Module ( PCM) controls the solenoid by providing a ground path.
