Why is my GMC Sierra 1500 in 3rd gear?

Pulled the harness off the tranny to put it into LIMP mode and it starts out in 3rd gear no problem. So 3rd gear is there.. Shift solenoids A and B have to be good else no 1st or 2nd. No errors codes.

Is there a problem shifting from 2nd to 3rd gear?

Have check engine, the computer says it needs the shift solenoid, the problem is it will not shift from 2nd to 3rd gear on an automatic transmission. Also found a vacuum line near to transmission disconnected but not sure where it goes.

Why is my GMC Sierra not shifting past 2nd?

No change then changed transmission. Still same thing that black plastic box on the side was cracked I just changed it still nothing. One fella said maybe change get out that cluster that plugs into the box. I’m at end of my rope. It’s Christmas and im getting really bummed where is there a fuse or relay if anybody can help please. Kathy in tx

What’s the problem with my GMC Sierra 1500?

Hi everyone I’m having the same problem I have a 1997 Chevy Tahoe LT 5.7 Vortec V8 2WD it’s stays in first gear and it don’t go into reverse but the lights go on when you put in reverse and no Check Engine light on anybody know what it could be the problem Hey! I have a 94 GMC suburban. Trans was leaking so I put in some stop leak.

Can a Chevy Silverado shift from 2nd to 3rd?

No 1st or 4th, shift 2nd to 3rd by itself when put in D or OD and locks converter: Goes into gear but sluggish like brakes are on, can manually shift to 2nd to get moving, then put in OD and truck shift 3rd as well as 4th are OK. Also, torque convertor locks up.

Can a 3rd and 4th gears work on a GMC Sierra?

3rd & 4th gears would work sometimes, other times not. You checked all the wiring, pins and plugs and all look good. You put in a used vacuum control module and that didn’t change anything.

Are there no reverse gears in a Chevy Silverado?

No Reverse in 2nd or 4th gear, 1st and 3rd only: Transmission goes into gear harshly, vehicle sluggish from start, no 1st, 4th, or torque convertor lockup, manual 2nd, 3rd, reverse gears only working, check engine light is on: Transmission is in Limp Home Mode or has no electrical power. Also, PCM has lots of error codes.

Why does my transmission shift hard from 1st to 2nd gear?

The fluid gets dirty over time and when it does, it causes plenty of troubles. Hard shifting is one of them. If the color is dark brown or burnt, changing it is likely to solve this issue. Dirty transmission fluid. (Photo Source: procarreviews)

Why is my GMC Sierra k1500 not shifting?

I have a 95’ k1500 it’s got a 4L60E but apparently it just needed a new oil pump which I replaced but I put it in about 2 months ago but it isn’t shifting out of 1st and the reverse isn’t working well it’s working but it takes a little longer for it to cooperate. Could it be the torque converter or a the solenoids?

What does it mean when transmission runs only in 2nd gear?

Transmission runs only in 2nd gear. This is known as running in LIMP IN MODE. The most important thing to remember, when trying to decide if you have a solenoid issue or internal transmission damage (causing the transmission to stay in Limp-In mode) is two very important things:

Where is the ECM on a GMC Sierra 1500?

32 people found this helpful. It’s usually right next to the ECM, it will have a 60 pin connector to it, and is about 4X5 . 22 people found this helpful. Alright sweet thanks “tennisshoes”

What kind of transmission does GMC Sierra have?

An available Allison ® 10-speed automatic transmission, the first in a heavy-duty pickup in its class, is paired with the available 6.6L Duramax Turbo Diesel so you can tow with command and control. and more. The spacious interior with premium materials offers a Crew Cab class-leading 43″ of front head room and 44.5″ of front leg room.

What kind of bed does GMC Sierra have?

The spacious Crew Cab interior cabin features premium materials with class-leading 43″ of front head room and 44.5″ of front leg room. Sierra 2500 Heavy Duty truck comes in 2WD and 4WD Crew Cab models with a 6′ 9″ standard bed or available 8′ long bed.

What kind of engine does GMC Sierra 3500 have?

Sierra 3500 Heavy Duty truck comes in 2WD and 4WD Regular Cab with an 8′ long bed SRW or DRW configuration. Requires Sierra 3500 HD Regular Cab Long Bed 2WD DRW with available Duramax 6.6L Turbo-Diesel V8, Max Trailering Package and gooseneck hitch.

How many miles does it take to shift a Subaru Outback?

189xxx miles on it and it won’t shift past 2nd in od. to shift manually in 3rd still nothing just revs up. pulled out of my truck originally. And i assumed it

Is it possible to have a shifting problem?

Then yes that can cause a shifting problem, but you should have a check engine light for it if it isn’t making proper contact internally, this tells the computer what gear you have selected. 23 people found this helpful. Is this the TCM?

What does it mean when your transmission is not shifting?

Q: transmission not shifting and the rpm’s keep climbing up. the transmission is not shifting properly, replaced both input and output speed sensors, but the rpms seem to be climbing high and the transmission does not seem to be shifting, gets up to speed fine, but the rpms just keep climbing on it… My car has 200000 miles.

What happens if there is no 3rd gear on a 4L60E?

Without being able to lock, it won’t be able to facilitate the transfer of energy to the upper gears and the transmission will remain in 2nd gear. Your 4L60E has a set of clutches that work with both 3’rd and 4’th gear. It’s referred to as the 3-4 clutch pack. A bad 3-4 clutch pack can certainly cause the 3’rd and 4’th gear to stop working.

Who is the remanufacturer of the Chevy 4.3 liter engine?

Accurate Engines is an industry leading remanufacturer of the Chevrolet 4.3 liter engine. Our remanufactured Chevy 4.3 liter engines are being shipped daily to warranty companies, Chevrolet dealerships, engine repair facilities and directly to Chevy vehicle owners.

When did the GMC Sierra get a 4.3L engine?

The most recent change to the 4.3L Vortec came in 2014, called the Gen V of the V6 engines, and this is now available as the base model for Chevrolet Silverado and GMC Sierra trucks.

Why does my Chevy Silverado shift from 2nd to 3rd gear?

No 1st or 4th gear, and transmission shifts from 2nd to 3rd by itself: The shift solenoid has failed, or there is a wiring problem between PCM and transmission. Replace the shift solenoid located in transmission pan, or check wiring continuity.

Why is my GMC Sierra 1500 in 3rd gear?