What chemicals do you put in a hot tub when you first fill it?
Steps to Hot Tub Water Chemistry
- a pH increaser.
- a pH decreaser.
- sodium-dichlor.
- chlorine granules.
What chemicals are needed to start spa?
The 4 most common chemicals tested in a spa are chlorine/bromine, pH, alkalinity and calcium hardness. If you are using an alternative sanitizer, the chemicals needed for start-up will vary.
What is spa activator?
Spa Activator is an odorless shock that is the most favored product by hot tub owners whether they use chlorine or bromine. Spa Activator is a shock not a sanitizer and is extremely effective in eliminating organic contaminants introduced by bathers such as body oils, lotions, urine, etc.
Should I shock my hot tub after refilling?
It is a good practice to shock with dichlor when you refill your spa. After that, regular maintenance can normally be accomplished with non-chlorine shock. Other times for shock treatment include before or after heavy use and when the spa has been neglected.
Can you use a hot tub without chemicals?
So although you cannot run a hot tub without chemicals, you can run a hot tub without the harsh effects of chemicals with Silk Balance. Please note – you must drain your hot tub and flush out the pipes with Clean Start if you are switching your existing water to Silk Balance for the first time.
How much chlorine do I put in my hot tub to start?
As a general rule the first time you fill a new hot tub, add 1.5 times the amount of chlorine that is recommended for weekly chlorination for the size of the hot tub. The goal is 5 to 8 parts per million, as opposed to the daily goal of 2 to 4 ppm.
What is the difference between spa shock and chlorine?
The main purpose of spa shock is to break-down organic waste contaminants which cause bad odors and cloudy or foamy hot tub water. If the Free Chlorine level is lower than the Total Chlorine level, it is time to add some spa shock to bring the level of Free Chlorine up to where it needs to be.
How do you sanitize a hot tub after use?
- Turn Off Power and Drain. Because hot tubs run high temperatures, they are the perfect breeding ground for mold and other bacteria.
- Clean the Tub. Now that the hot tub is empty, spray the interior with water and apply a hot tub cleaner.
- Remove and Clean Filters.
- Refill the Hot Tub.
- Treat the Water.
- Maintain Regularly.
Should I put chlorine in my hot tub everyday?
How Much Chlorine Should I Add to my hot tub? A chlorine level of between 3-5mg/l must be maintained in your hot tub at all times. The addition of chlorine will depend upon usage and bathing habits. It could be daily or every 2-3 days (for 1mg/l add 2g per 1000 litres).
What is the difference between spa shock and sanitizer?
Spa shocks work much like sanitizers and are used to kill any bacteria, algae, or bad odors your daily sanitizer may miss. Shock treatments can be considered support for your sanitizer and are applied based on how often your hot tub is used. Shock Treatments typically come in two forms.
